PALLISADE FENCING

The main objective of Palisade Fencing is to give a stylish solution to the problem of perimeter security. The triple pointed top is the most popular for security purposes. The external face of Palisade has a smooth surface, the two horizontal rails are spaced widely apart and the gaps between the pales are small with no convenient handholds to give an anti-scaling effect. The pales are corrugated which gives them inherent strength, the greater the number of corrugations the stronger the pale.

Fence pale heads	Triple Pointed	Round top & notched	Single point	Round top	Flat top
We can supply a selection of heads with this fencing system and care should be taken to select the correct head to suit your needs.

Heights:
Security palisade is available in various heights to suit a variety of situations.

Finish:
Steel palisade is galvanised after manufacture, but there is an option for colour. It can be either polyester powder coated in a range of colours or it can be painted.

Palisade Gates are available to compliment the chosen Fencing System.

CHAIN LINK FENCING

Chainlink is probably the best known of all industrial products, a well proven and popular fence. Chainlink fencing is a very strong and versatile product, and can be erected on round or square section steel posts in painted finishes, galvanised or P.V.C. coating in a variety of attractive colours. It also comes with the option of barbed wire extensions as a deterrent to intruders and is used extensively for sports and leisure grounds, industrial units or any premises requiring security.

WELDMESH

A fully welded, security fencing system Manufactured in square or rectangular mesh from steel wire, welded at each intersection. The material provides a combination of strength and resistance to penetration, while offering good visibility and maintaining harmony with the environment. Weldmesh offers a choice of coatings and finishes that increase longevity and help to blend it into its surroundings. The presence of Weldmesh also acts as a deterrent. It offers resistance, and it takes considerable time and effort to cut.

ARCHITECTURAL FENCING

This family of products offers a traditional fencing system with a number of styles designed for maximum strength and provides an alternative to the acknowledged security provided by steel Palisade. The fencing has been developed to provide vandal resistance whilst remaining aesthetically in tune with the surroundings. Constructed in the form of welded panels with a flat bar or rhs top and bottom horizontal rail welded to round or square bar infills with a variety of heads to suit a number of applications. It has proved a popuar choice for local authority, commercial and recreational applications.

The tops of the fence can be finished in various ways as illustrated below;

A comprehensive range of forged heads are available to help complement an impressive building or Civic property or other prestige project. Some of the more popular shapes are shown below;

GATES

The area which usually suffers most is the entry point, so particular attention is required where gates are concerned. All gates are fully designed and manufactured in-house and therefore Gates of all sizes and configurations can be produced galvanised and polyester powder coated to any colour. We also provide advice on other entry points and gate entry systems from pedestrian through to motor vehicle.

SWINGING GATES

Swinging gates are available in most styles of fencing; chain link, vertical bar, steel palisade, post and rail, etc. and of course in bespoke designs.

Single Leaf swing gates up to 7.00 opening.

Double Leaf swing gates up to 14.00m opening.

Combination gates with double and single leaves swinging from common post.

SLIDING GATES

Gates are available in a variety of styles and the best style for any particular scenario is best chosen with the application and situation in mind. Sliding gates are an ideal way to provide a large access without taking up too much space. For example, imagine you required a double vehicle access of say 6m, a single gate would need enough room for an arc of 6m radius, a pair of gates would need enough room on both sides for arcs of 3m radius, a sliding gate only needs enough room to move horizontally for 6m. Gates can also be Automated if required.

PALADIN FENCING

Its innovative and unique appearance makes this the most popular of the Weldmesh fencing panels. It is regularly specified where an aesthetically pleasing finish is essential. The panels feature pressed 'V' forms containing additional 4mm diameter wires for the full panel width, offering strength, rigidity and a cost-effective anti-intruder barrier solution. To achieve fence heights in excess of 2.4m the panels are designed for multi-lift erection i.e. one or more panels are placed above the bottom panel. Due to the design this system is simple and very quick to install.

Duloc Fencing	Exempla Fencing
Exempla Fencing	Ultimat Fencing

FENCING ACCESSORIES

RAZOR WIRE; Coiled Razor Barb provides a deterrent to perimeter protection suitable for use over roofs/walls and strained wire systems. Razor Wire is available in a range of diameters.

BARBED WIRE; Can also be used to act as extra security in addition to any fencing system. Very economical and can be installed swiftly